Transmission Fluid Pump: Notes
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 5-50 Nm V.A.G 1331
- Used Oil Collection and Extraction Unit SMN 372500
Short Description
Transmission fluid pump can be replaced without removing transmission. Vehicle must be raised and any covers installed on bottom of front end must be removed. Control arm to suspension strut connection does not need to be separated. Driveshaft also does not have to be removed. It is not necessary to perform a "basic setting". Only the transmission fluid and pump cover have to be replaced.