Special Tools

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Adapter VW 771/40
Threaded Adapter from Kukko Support 22/1
Driving Sleeve VW 244 B
Thrust Plate VW 401
Thrust Plate VW 402
Punch VW 407
Tube 37 mm Dia.VW 416 B
Guide Piece VW 436 A
Guide Pin VW 439
Holding Fixture VW 801
Guide Piece 10-15
Thrust Pad 3124
Bearing Driver 3264
Subframe Support Assm. Device 3290
Drift T10168
Thrust Piece T10203
Punch VW 407
Drift T10168
Triple Square Socket Driver 3357

Fig 1: 3357 Triple Square Socket Driver
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Connecting Pin T10027 A

Fig 2: Identifying Connecting Pin T10027 A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Hose Clamp Pliers V.A.G 1275

Fig 3: Hose Clamp Pliers V.A.G 1275
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench (5-50 Nm) V.A.G 1331

Fig 4: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Sleeve VW 423

Fig 5: Identifying Sleeve VW 423
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Hose Clamps up to 25 mm Dia. 3094

Fig 6: 3094 Hose Clamps
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Pin 3282/29

Fig 7: Identifying Pin 3282/29
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Adjustment Plate 3282/33

Fig 8: Identifying Adjusting Plate 3282/33
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Transmission Support Jig 3336

Fig 9: Identifying Transmission Support Jig. 3336
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Shop Crane - Load Cap = 700-1200 KGVAS 6100

Fig 10: Identifying Shop Crane VAS 6100
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Block T10083

Fig 11: Identifying Pressing Support T10083
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Drip Tray for VAS 6100 VAS 6208

Fig 12: Drip Tray For Shop Crane VAS 6208
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Pulling Hook T20143

Fig 13: Extractor Hook T20143
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Trim Removal Wedge 3409

Fig 14: 3409 Wedge
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 15: Identifying Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Engine Support bridge 10-222 A
Transmission Support 3282
Engine-/Gearbox Jack V.A.G 1383 A
Tensioning Strap T10038
Engine Support Basic Set T40091
Engine Support Supplement Set T40093

Fig 16: Identifying Special Tools -- Transmission Housing, Shift Mechanism, Input Shaft, Output Shafts (Pinion Shafts), Differential And Selector Rods

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Holding Plate VW 309
Holding Fixture VW 313
Transmission Support VW 353
Thrust Tube VW 455 or Sleeve 3160
Slide Hammer-Complete Set VW 771
-1- Kukko Puller 12-14.5 mm 21/1
-1- Kukko Extractor 14.5-18.5 mm 21/2
-1- Kukko Extractor 23.5-30 mm 21/4
-3- Kukko Separating Tool 5-60 mm 17/0
-4- Kukko Support 22/1
-4- Kukko Support 22/2

Fig 17: Identifying Special Tools -- Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Bracket 30-211 A
Thrust Piece T10143 or Press Tool for Shaft Seal T10180
Drift T10169 or T10362
Thrust Piece T40008
Torque Wrench (5-50 Nm) V.A.G 1331
Inductive Heat Unit V.A.G 1416