Transmission, Transporting

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Transmission Support Jig 3336
Shop Crane VAS 6100

-- Install the Transmission Support Jig 3336 to the transmission housing.

Fig 1: Identifying Transmission Support Jig VAS 3336

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unlock and move the support arm using the locking bolt -arrow-.

Fig 2: Adjusting Support Arm On Sliding Piece With Locking Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Number of visible holes = 6.

-- Lift the transmission using the Shop Crane VAS 6100 and the Transmission Support Jig 3336.

-- Set the transmission down, for example, in the transport container.