Shift Knob, Boot And Noise Insulation: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the noise insulation -1- first, if equipped.

Fig 1: Identifying Noise Insulation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Then, turn the inner side of the boot toward the outside.

Install the shift knob all the way on.

-- Install the shift knob with the boot and squeeze the new clamp -arrow- together.

Fig 2: Identifying Clamp

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clip the boot and frame into the center console.