Gear Shift Unit Overview
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Bushing
- Removing and installing, refer to -item 16- in TRANSMISSION HOUSING OVERVIEW .
- For the gear shift shaft.
- Gear Shift Unit
- Consisting of the gear shift shaft and the gear shift cover.
- The components cannot be separated from each other.
- Can be removed and installed with the transmission installed.
- O-ring
- Always replace after removing.
- Insert in the groove in the gear shift cover.
- Install using transmission fluid.
- Cap
- For transmission ventilation.
- Bolt
- Tightening specification, refer to -item 16- in TRANSMISSION HOUSING AND SHIFT UNIT OVERVIEW .
- Always replace after removing.
- For the gear shift unit to the transmission housing.
- Selector Shaft Seal
- Removing and installing, refer to SELECTOR SHAFT SEAL .