Transmission To Engine Tightening Specifications

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission To Engine Bolt Sequence

Item	Bolt	Quantity	Nm
1	M12 x 65	2	80
2	M12 x 170 Also starter to transmission	1	80
3	M12 x 170 Also starter to transmission	1	80
4	M10 x 65	3	40
5	M12 x 95	1	80
6	M6 x 8 Small flywheel cover plate (not present here)	1	10

-A- alignment sleeves for centering

Component	Nm
Mount for lower starter plug wires	23