Transmission, Transporting

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Transmission Support Jig3336
Shop Crane - Load Cap = 700-1200 KGVAS 6100

-- Attach the transmission support jig3336 to the clutch housing.

Fig 1: Identifying Transmission Support Jig 3336 Secured To Clutch Housing

-- Unlock and move the bar -arrow- using the locking bolt.

Fig 2: Adjusting Support Arm On Sliding Piece With Locking Pin

Number of visible holes = 5.

-- Lift the transmission using the shop crane - load cap = 700-1200 KGVAS 6100 and transmission support jig3336.

-- Set the transmission down, for example, into the transport container.