Shift Knob, Boot And Noise Insulation: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the noise insulation -1- , if equipped.

Fig 1: Identifying Noise Insulation

-- Then, turn the inner side of the boot toward the outside.

Install the shift knob all the way on.

-- Install the shift knob with the boot and squeeze the new clamp -arrow- together.

Fig 2: Identifying Clamp

-- Clip the boot and frame into the center console.