Disassembly And Assembly: Transmission: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Holding Plate VW309
- Transmission Support VW353
- Needle Bearing Drift VW295
- Driving Sleeve VW244 B
- Hot Air Blower VAG1416
- Torque Wrench 1331 5-50Nm VAG1331
- Bracket 30-211A
- Driving Sleeve 32-111
- Thrust Piece T10030/4 from Assembly Tool T10030
- Tube 37 mm Dia.VW416B
- Puller T10408
- Thrust Piece T10408/2
- Plate T10408/3
- Support Bridge T10323
- Subframe Support Assembling Device 3253/7
- Thrust Pad Con. 8/65VW433
- Torque Wrench 1332 40-200Nm VAG1332
- Puller - Kukko Puller - 60-150mm Width, 200mm Length 18/1 (Qty: 2)
- Sealing PasteAMV 188 200 03
- M8 x 100 mm Stud Bolt