Shift Knob, Boot And Noise Insulation Overview
WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Emblem
- Can be carefully pried out of a plastic or leather shift knob.
- Shift Knob
- With the boot attached.
- The shift knob and boot cannot be separated from each other.
- Always replace them together.
- Removing and installing, refer to SHIFT KNOB, BOOT AND NOISE INSULATION .
- Clamp
- For securing the shift knob to the shift lever.
- Attach to the shift knob using the Hose Clamp PliersVAG1275.
- Always replace after removing.
- Noise Insulation
- Not installed on all vehicles.
- Retaining tab spacing varies, therefore it can only be installed in one position.
- Shift Lever