LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (2.0L - Diesel Fuel Injection - Engine Code: CVCA (Convertible)) >> 23 Diesel Fuel Injection >> Removal And Installation >> High Pressure Lines >> High Pressure Line Between The High Pressure Reservoir (Rail) And The High Pressure Pump, Removing

High Pressure Line Between The High Pressure Reservoir (Rail) And The High Pressure Pump, Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Danger of malfunction caused by dirt.

-- Follow the guidelines for clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Remove the engine cover, refer to ENGINE COVER .

-- Clean the fuel line and line connection with detergent and dry it with compressed air.

-- Remove the bolt -1-.

-- Remove the union nuts -arrows- and then remove the high pressure line.

Fig 1: Identifying Bolt And Union Nuts
GWWA23-10371Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.