Mass Air Flow Sensor -G70-: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -1- from the Mass Air Flow Sensor -G70-.

Fig 1: Identifying Mass Airflow Sensor -G70- Connector, Vacuum Line, Bolt And Clamp

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the spring clip -4- with the Spring Clip Pliers VAS 6362 and disconnect the intake hose from the Mass Airflow Sensor --.

-- Remove both bolts from the Mass Airflow Sensor -- and carefully remove the Mass Airflow Sensor -- from the air filter housing guide.