LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (2.0L - Fuel Mixture Preparation, Fuel Injection - Engine Code(S): CJAA & CVCA (Convertible)) >> 23 Fuel Mixture Preparation, Fuel Injection >> Removal And Installation >> High Pressure Fuel Pump >> Removing >> Requirements

High Pressure Fuel Pump: Removing: Requirements

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Only remove the high pressure fuel pump when the engine is cold.

Make sure no contaminants enter the fuel system when removing the high pressure fuel pump.

Seal off the connections in the fuel system using the plugs from the Engine Bung Set VAS 6122.

scientia non olet · About LEMON Manuals