Wheel Changing And Wheel Installation
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Coat the wheel centering seat. Refer to WHEEL CHANGING, PROTECTING WHEEL CENTERING SEAT AGAINST CORROSION .
- When mounting a wheel, tighten all wheel bolts uniformly by hand.
- Tighten the wheel bolts diagonally to approximately 30 Nm.
- Lower the vehicles onto the floor. Tighten all the wheel bolts diagonally to the tightening specification using a torque wrench. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .
WARNING:
Do not use an impact wrench to install the wheel bolts.