LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Wheels, Tires & Wheel Alignment (Convertible)) >> 44 Wheels, Tires, Wheel Alignment >> General Information >> Wheel/Tire Vibration, Causes And Solution >> Vibration Control System

Vibration Control System

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Expanded functions can be performed using Road Force Measurement System VAS6230A in addition to the previously known balancers.

Fig 1: Identifying Vibration Control Tire Balancer (VAS 6230)
GWWN44-10209Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A special characteristic of this system is testing the radial force of wheel/tire during rolling.

For this purpose, a roller presses a force of approximately 635 kg against the wheel. This simulates the tire contact force against the street surface while driving.

Tire contact forces fluctuate due to radial- and lateral run-out and differing rigidity in the tires.

The Road Force Measurement System VAS6230A detects and stores the position of the maximum measured radial force in the tires. After that, the position of smallest dimension between rim flange and disc wheel center is measured.