Rear Axle Toe, Adjusting, Torsion Beam
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
The toe cannot be adjusted.
If values are outside tolerance, transverse inclination must be checked first and compensated if necessary. Refer to VEHICLE TRANSVERSE INCLINATION, ZERO POSITION .
If measured values are still not within specified range, check axle beam for damage and replace if necessary.