Axle Alignment Target Values, Multi-Link Suspension

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Specified values valid for all engine versions.

PR number explanations. Refer to VEHICLE DATA LABEL .

Standing heights listed in the tables refer to dimension -a-.

Fig 1: Identifying Dimension From Center Of Wheel To Lower Edge Of Wheel Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Front axle

Basic Suspension

Sport Suspension

Sport Suspension Beetle Sedan 2.0L engine 147 kW (EU)

Comfort Suspension

PR Numbers

2UA

2UC

2UD

Total toe (wheels not pressed)

10' ± 10'

Camber (wheels in straight ahead position)

-40' ± 30'

-33' ± 30'

Maximum permissible difference between both sides

maximum 30'

Toe-out angle ⁽¹⁾ with steering wheel turned 20° to left and right

1°32' ± 20'

1°25' ± 20'

Caster

7° 53' ± 30'

7° 42' ± 30'

Maximum permissible difference between both sides

maximum 30'

Standing height

386 +/- 10 mm

396 +/- 10 mm

⁽¹⁾	The toe angle difference can also be indicated negatively in alignment computer, depending on manufacturer.

Specified values valid for all engine versions.

For an explanation of the PR number. Refer to VEHICLE DATA LABEL .

Rear Axle	Basic Suspension	Sport Suspension	Sport Suspension Beetle Sedan 2.0L engine 147 kW (EU)	Comfort Suspension
Camber	-1° ± 30'	-1°20' ± 30'	-1°45' ± 30'	-1°20' ± 30'
Maximum permissible difference between both sides	maximum 30'	maximum 30'	maximum 30'	maximum 30'
Total toe (at prescribed camber)	+10' ± 10'	+10' ± 10'	+10' ± 10'	+10' ± 10'
Maximum permissible deviation from direction of rotation	maximum 20'	maximum 20'	maximum 20'	maximum 20'
Standing height	396 +/- 10 mm	396 +/- 10 mm	396 +/- 10 mm	406 +/- 10 mm