Perform The Basic Setting

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

After every change at wheels, the button SET -1- must be pressed with ignition switched on and vehicle standing still until a signal tone sounds. The signal tone confirms the basic setting.

Fig 1: Identifying Tire Pressure Monitoring Display Button

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The SET -1- button in inside the glove compartment.