Shorten The Bleed Pipe On The Oil Filler VAS 6262 A As Follows:

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Shortening Pipe On Adapter For Oil Filling VAS 6262 A

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Shorten the pipe to dimension -a-. This assures the pipe on the Oil Filler VAS 6262 A will not touch the bottom on some oil containers.

Dimension -a- = 210 mm

NOTE:

Dimension -a- is measured starting from the shaft (the green surface) on the Oil Filler VAS 6262 A.

-- Shorten the bleed pipe with Brake Line Tool Kit - Pipe Cutter VAS 6056/2.

Fig 2: Cutting Pipe Using Pipe Cutter

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If ATF is filled, only use ATF available as a replacement part.

-- Always replace the seal -arrow- for the ATF check plug when checking the ATF level.

Fig 3: ATF Inspection Plug

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.