Overview - ATF Cooler, Round Version

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of ATF Cooler, Round Version

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Transmission Housing
O-Ring
- Replace after removing
ATF Cooler
- Removing and installing. Refer to Fig 2.
- Installed position: Fig 2
O-Ring
- Replace after removing
Washer
Plate Spring
- Installed position: The convex side faces toward the bolt -item 7- in Fig 1
Bolt
- 36 Nm

Fig 2: Identifying ATF Cooler At Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the tab -arrow B- into the opening in the transmission housing when installing the ATF cooler -1-.