Windshield Washer System, Checking And Adjusting Spray Nozzles

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

In cases where contamination in spray jet results in an uneven spray pattern, remove the spray jet and rinse it with water in the opposite direction of the spray flow. Subsequently blowing through in the opposite direction of the spray flow with compressed air is permitted. Do not use any other objects to clean the spray nozzles.

Adjusting the Spray Nozzle Adjustment for the Windshield:

Fig 1: Identifying Windshield Spray Fields For Comparison

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The washer nozzles are preset. Small height adjustments can be made.

-- If both spray fields are not at same height, adjust spray direction upward or downward as follows:

Fig 2: Identifying Adjustment Of Spray Nozzle -3- With Adjuster -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 -

Cowl plate in front of front window

2 -

Adjuster TORX size 8

3 -

Fan-type nozzle

4 -

Hood

-- Adjust the spray nozzle -3- by turning at the adjuster -2- with a TORX screwdriver.

"Clockwise" deeper adjustment.
"Counter-clockwise" higher adjustment.