LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Maintenance Procedures (Convertible)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Wheel Bolts, Tightening To Tightening Specification >> Remove the Cap

Remove the Cap

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Wire Clip And Wrench From Vehicle Tools -Arrow A- To Remove Full Wheel Trim
GWWN01-10640Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If the vehicle has a decorative wheel hubcap, loosen the full wheel trim all around with the wire clip and wrench from the vehicle tools -arrow A- and then remove it -arrow B-.