LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Maintenance Procedures (Convertible)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Upper Engine Cover, Removing And Installing >> TDI Cr Engines >> Installing

TDI Cr Engines: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Make sure the 4 fasteners (ball sockets) are positioned correctly before installing the engine cover. Adjust their position is necessary. Otherwise the engine cover will get damaged.

-- If necessary, push the ball sockets on the engine cover into the correct position.

Fig 1: Identifying Ball Sockets On Engine Cover Correct Position
GWWN01-10740Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the engine cover on the mounting points and press on the corners.

scientia non olet · About LEMON Manuals