LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Maintenance Procedures (Convertible)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Upper Engine Cover, Removing And Installing >> 2.5L SRE Engines >> Installing

2.5L SRE Engines: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Mount the engine cover on the rear attaching points -arrows B- and press down on it.

-- Then press down on the engine cover on the front attaching points -arrows A-.

NOTE:

Carefully press the engine cover onto the fastening points by hand until it noticeably engages.

Install in reverse order of removal.

scientia non olet · About LEMON Manuals