SERVICE INTERVAL DISPLAY, RESETTING, WITHOUT Vehicle Diagnostic Tester THROUGH MY 2013

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Using the Rocker Switch on the Windshield Wiper Lever or the Button in the Multifunction Steering Wheel

Fig 1: Identifying Rocker Switch On Windshield Wiper Lever

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Using the rocker switch, select the "settings" menu.

-- Using the button on the multifunction steering wheel, select the "settings" menu.

Fig 2: Identifying Multifunction Steering Wheel Buttons (All Models Except 2004-08 Golf Sedan & 2004 R32)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Go the "Service" submenu, select "Reset".

-- Then press the "OK button" -1- in the windshield wiper lever or in the multifunction steering wheel -5- to reset the service interval display.

-- Press the "OK button" to confirm the security question that follows.

Using the Buttons in the Instrument Cluster

-- With the ignition turned off, hold the -3- button pressed.

Fig 3: Identifying Instrument Cluster Buttons (2012 Beetle)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release the button -3- press the button for setting the clock -1- one time quickly.

The Service Interval Display is now in the Reset mode.

After a brief period, the display switches back to the normal display.