LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Ignition/Glow Plug System [CPLA,CPPA,CPKA,CPRA]) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Installing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

-- Install the air duct hose.

-- Install the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

Tightening Specifications 

scientia non olet · About LEMON Manuals