LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Lubrication [CPLA,CPPA,CPKA,CPRA]) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pump, Removing And Installing >> Removing

Oil Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Remove bolt -arrow- and oil baffle.

Fig 1: Locating Oil Baffle Bolt
GWWA17-10746Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the chain tensioner spring using the : T10118  in direction of -arrow- and secure it with the : T40265  .

Fig 2: Identifying Chain Tensioner Spring, Remove/Install Components
GWWA17-10747Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the oil pump.

Fig 3: Locating Oil Pump Bolts
GWWA17-10749Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.