Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the gaskets and seals.

Secure all hose connections with hose clamps. Refer to the Parts Information.

-- Install the engine oil cooler -3- with a new seal -2-.

Fig 1: Identifying Oil Cooler, Bolts And Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the subassembly bracket. Refer to SUBASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to Filling .

-- Fill with engine oil and then check the level. Refer to ENGINE OIL, DRAINING OR EXTRACTING; REPLACING OIL FILTER AND FILLING ENGINE OIL