Oil Separator, Removing And Installing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove ignition coil cylinders "3 and 4". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .

-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.

Fig 1: Locating Oil Separator Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove bolt -2- and then remove crankcase ventilation hose -3- from oil separator.

-- Remove the bolts -arrows- and the oil separator.