LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (Controls, Housing (02E)) >> 34 Controls, Housing >> Transmission, Removing And Installing >> Transmission Tightening Specifications

Transmission Tightening Specifications

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Transmission to Engine 

Fig 1: Direct Shift Automatic Transmission Loosening Sequence
GWWA34-10045Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Item Bolt Nm
1 M12 x 55 80
2 M10 x 45
  • Starter to transmission
 40
3 M12 x 55
  • Is accessible only through the opening in the removed starter
 80
4 M10 x 45 or M10 x 40
  • Starter to transmission
 40
5 M12 x 65 or M12 x 70 80
6 M10 x 50 40
7 M10 x 50 40
8 M10 x 50 40
9 M12 x 65 or M12 x 70 80
10 M12 x 55 80
A Alignment sleeves for centering
scientia non olet · About LEMON Manuals