LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (Controls, Housing (02E)) >> 34 Controls, Housing >> Transmission, Disassembling And Assembling >> Overview - Transmission >> Different Fluid Pump Bolts

Different Fluid Pump Bolts

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transmission Oil Pump
GWWA37-0671Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

All Four Bolts -arrows- with Pan Heads

NOTE:

Always replace bolts that were tightened with an additional turn.

Tightening Specifications 

Step Bolts Tightening Specification/Additional Turn
1 -arrows- 5 Nm
2 -arrows- 90° additional turn

3 Bolts with Pan Head, Topmost Bolt -arrow- with Countersunk Head 

Fig 2: Bolts With Torque Specifications
GWWN34-10842Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Always replace bolts that were tightened with an additional turn.

Tightening Specifications 

Step Bolts Tightening Specification/Additional Turn
1 -1 bolt with countersunk head- 8 Nm
2 -3 bolts with pan head- 8 Nm
3 -3 bolts with pan head- 90° additional turn

Transmission Input Speed Sensor G182 / Clutch Oil Temperature Sensor G509. 

Fig 3: Identifying Transmission Sensors And Bolts
GWWA37-0676Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -  Transmission Input Speed Sensor -G182- /Clutch Oil Temperature Sensor -G509-.

B -  Bolt - 10 Nm

C -  Electrical connection