Securing On Engine And Transmission Holder
WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Holding Fixture: VW313
- Holding Plate: VW309A
- Transmission Support: VW353
Remember there is oil in the transmission. Do not turn the transmission with the vents facing downward when transporting or when it is on the assembly stand. The oil will leak out.
NOTE:
Remove the bleed cap if necessary and seal using suitable oil-tight plugs.
Secure the Transmission on the : VW353 .