Overview - SUBFRAME Mount

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Assembly Mounts Exploded View

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Engine Mount
Bolt
- Engine mount to body
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Connecting Bar
Bolt
- Engine mount and body connection location
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- Engine mount to body
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Bolts
- Engine mount to engine support
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Pendulum Support
- Removing and installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Replace after removing
- Pendulum support to subframe
Bolts
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Replace after removing
- Pendulum support to transmission
Bolt
- 60 Nm +90°
- Replace after removing
- Transmission mount to transmission support
Bolt
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Replace after removing
- Transmission mount to chassis
Transmission Mount
Transmission Support
Bolt
- 40 Nm +90°
- Double Bolt
- Transmission support to transmission
Bolt
- 40 Nm +90°
- Transmission support to transmission
Engine Support
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .