Transmission Input Speed Sensor -G182- AND Clutch Oil Temperature Sensor -G509-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the DSG Transmission Mechatronic -J743-. Refer to MECHATRONIC, REMOVING AND INSTALLING .

-- Remove screw -B- and carefully pry out sensor -A- with screwdriver or pliers.

Fig 1: Identifying Transmission Sensors And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the connector -1- of the Transmission Input Speed Sensor -G182- and Clutch Oil Temperature Sensor -G509- using the : T10465 .

Fig 2: Identifying Connector -1- And Release Tool - T10465-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

Risk of damaging electrical wire.

Do not pull on the wire.