LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (Cylinder Head, VALVETRAIN [CPLA,CPPA,CPKA,CPRA]) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Vibration Damper Sealing Ring, Replacing >> Removing

Vibration Damper Sealing Ring, Replacing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Remove the seal -arrow- with the : T40274  .

Fig 1: Identifying Seal Installer - Crankshaft T40274
GWWN13-10592Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals