Vacuum Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Bolts And Vacuum Pump

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the sealing surfaces.

-- Turn the vacuum pump coupling plate so that it engages in the camshaft groove when installing the vacuum pump.

-- Position the new seal on the vacuum pump and insert the two bolts. Position the vacuum pump with the seal on the cylinder head.

-- While doing so pay attention that it lays flush on the flange.

Further assembly is performed the reverse order of the removal.

-- Install the high pressure pump with >>roller tappet<<. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .