Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Belt Routing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal and note the following:

-- Position the ribbed belt as illustrated above.

Vibration damper
Ribbed belt tensioner
Generator
A/C compressor

-- Turn the tensioning system in direction of -arrow- and remove the : T10060A .

Fig 2: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start engine and check whether ribbed belt runs correctly.