Engine Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the pendulum support. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .

-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Lift the engine using the : 10-222A/11 -1- to dimension -a-.

Fig 1: Identifying Engine Support Bridge - Spindle 10 - 222 A /11

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Dimension -a- = approximately 50 mm.

-- Remove the bolts -1, 2 and 3- and engine support.

Fig 2: Engine Support - Tightening Specification and Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.