Balance Shaft, Removing And Installing, Intake Side: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Engine removed.

-- Remove the coolant pump toothed belt. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .

-- Remove the upper timing chain cover. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -2-.

Fig 1: Identifying Drive Wheel And Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the drive wheel -1- for the coolant pump toothed belt.

-- Remove the intermediate shaft sprocket -1-.

Fig 2: Identifying Intermediate Shaft Sprocket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Ignore -1-.

-- Remove the bolt -2- for the intake side balance shaft and remove the balance shaft.

Fig 3: Identifying Intake Camshaft Balance Shaft

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.