Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING, ENGINE CODE CPPA: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Fig 1: Identifying Connecting Pipe And Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Squeeze the locking ring on both side and remove the connecting pipe -1-.

-- Remove the bolts -arrows-.

-- Push the coolant pipe -2- gently aside.

Fig 2: Locating Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the Secondary Air Injection Solenoid Valve -N112-.