LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Exhaust System, Emission Controls [CPLA,CPPA,CPKA,CPRA]) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Exhaust System, Installing Without Tension >> Tail Pipes, Aligning

Tail Pipes, Aligning

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Align the rear muffler so that the space -a and b- between the opening for the bumper and the tail pipes is the same.

Fig 1: Aligning Exhaust System
GWWV26-0959Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the rear muffler suspended mount to align the tail pipes.

-- Install the clamping sleeve. Refer to CLAMPING SLEEVE INSTALLATION POSITION .

scientia non olet · About LEMON Manuals