LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Exhaust System, Emission Controls [CPLA,CPPA,CPKA,CPRA]) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Clamping Sleeve Installation Position >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Clamping Sleeve Tightening Specification
Clamping sleeve -A- with two individual clamps 25 Nm
Clamping sleeve -B- with continuous clamp. 35 Nm
scientia non olet · About LEMON Manuals