LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Engine Assembly [CPLA,CPPA,CPKA,CPRA]) >> 10 Engine Assembly >> SUBFRAME Mount >> Overview - SUBFRAME Mount >> Engine Support - Tightening Specification and Sequence

Engine Support - Tightening Specification and Sequence

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Support - Tightening Specification and Sequence
GWWA10-11481Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in steps in the sequence -1 to 3- :

Step Bolts Tightening Specification/Additional Turn
1. -1 through 3- 7 Nm
2. -1 through 3- 40 Nm
3. -1 through 3- Turn an additional 90°.
scientia non olet · About LEMON Manuals