Overview - Electric Coolant Pump

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electric Coolant Pump Exploded View

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 5 Nm
Plastic Sockets
Nut
- 9 Nm
Coolant Hose
Bracket
- For After-Run Coolant Pump -V51-
Spring Clamp
After-Run Coolant Pump -V51- / Heater Support Pump -V488-
- With bracket
- Refer to After-Run Coolant Pump -V51- / Heater Support Pump -V488-, REMOVING AND INSTALLING
Spring Clamp
Coolant Hose
Connector
- Clipped on bracket
Clip
Bolt
- 20 Nm
Bracket
- After-Run Coolant Pump -V51- to the engine
- Needs to be removed in order to remove the engine
- The lower attachment point is mount for the engine bracket

Transmission Coolant Valve -N488-, Vehicles with DSG Transmission

Fig 2: Exploded View Of Transmission Coolant Valve -N488-, Vehicles With Dual-Clutch Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 9 Nm
Coolant Hose
Nut
- 9 Nm
Coolant Hose
Transmission Coolant Valve -N488-
- Removing and Installing. Refer to Transmission Coolant Valve -N488-, REMOVING AND INSTALLING, VEHICLES WITH DSG TRANSMISSION .
Bracket
- For the Transmission Coolant Valve -N488-