Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Make sure the pump -1- on the controller housing -2- and the seal -3- are seated properly -arrows-.

Fig 1: Identifying Controller Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the coolant pump bolts. Refer to Figure.

-- After installing a new coolant pump -2-, remove the cap -1- from the drive wheel.

-- Install the toothed belt on the coolant pump. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to Filling .

Fig 2: Identifying Coolant Pump

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.