Coolant Pump Toothed Belt, Removing And Installing: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamps -3 and 5-.

Fig 1: Identifying Senors And Clamps

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector from the Charge Air Pressure Sensor -G31- -arrow-.

-- Remove the bolts -1 and 4- and then remove the air duct pipe downward.

-- Lift the clamp -2-, remove the coolant supports and set them aside.

Fig 2: Identifying Coolant Hose Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and remove the toothed belt guard -1-.

Fig 3: Identifying Toothed Belt Guard

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

Fig 4: Identifying Air Guide Pipe

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the air duct pipe by lifting the clamps -2- and opening the hose clamp -3-.

-- Counterhold the vibration damper with the :T10355  .

Fig 5: Identifying TDC

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Counterhold the vibration damper and remove the bolt from the coolant pump the drive wheel -1- by loosening three turns. Use :VAG1410  and :T10360  .

Fig 6: Removing Toothed Belt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the toothed belt -2-.