LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Heating, Ventilation & Air Conditioning (Convertible)) >> 80 Heating, Ventilation >> Removal And Installation >> Temperature Door Release Cable >> Installing

Temperature Door Release Cable: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

-- Install the center console. Refer to REMOVAL AND INSTALLATION .

-- Install the display control head front section. Refer to DISPLAY CONTROL HEAD, FRONT SECTION .

-- Install footwell vent on the driver side. Refer to DRIVER SIDE FOOTWELL VENT .

NOTE:

After the installation perform a function test.

The temperature adjustment knob must be able to be adjusted easily.

scientia non olet · About LEMON Manuals