LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Heating, Ventilation & Air Conditioning (Convertible)) >> 80 Heating, Ventilation >> Removal And Installation >> Display Control Head >> Display Control Head, Rear Section >> Removing

Display Control Head, Rear Section: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery. Refer to REMOVAL AND INSTALLATION .

-- Remove the display control head front section. Refer to DISPLAY CONTROL HEAD, FRONT SECTION .

-- Remove the center console. Refer to REMOVAL AND INSTALLATION .

-- Push the catch -5- to the side and remove the release cable -1- from the retainer as well as the adjusting lever -2-.

-- Release the flexible shaft -3- locking mechanism -arrow- and then remove it.

-- Remove the display control head rear section -4- from the vehicle.

Fig 1: Identifying Release Cable, Adjusting Lever, Flexible Shaft And Display Control Head Rear Section
GWWM80-10028Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals