LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Heating, Ventilation & Air Conditioning (Convertible)) >> 80 Heating, Ventilation >> Removal And Installation >> Display Control Head >> Display Control Head, Front Section >> Installing

Display Control Head, Front Section: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

NOTE:

The display control head knobs must be set in the same position (see removal) before installing.

Only then will both halves of the housing fit together.

After the installation perform a function test.

scientia non olet · About LEMON Manuals