LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Heating, Ventilation & Air Conditioning (Convertible)) >> 80 Heating, Ventilation >> Removal And Installation >> Auxiliary Heater Heating Element -Z35- >> Installing >> Notes

Auxiliary Heater Heating Element -Z35-: Installing: Notes

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- The Auxiliary Heater Heating Element -Z35- -2- is installed in the reverse order of removal. When doing this, note the following:

NOTE:

The flat terminal housing -3- is properly secured to the Auxiliary Heater Heating Element -Z35- -2-.

Tighten the ground cable nut for the Auxiliary Heater Heating Element -Z35- to 9 Nm. Make sure the ground cable is positioned correctly.

After the installation perform a function test.

Fig 1: Identifying Flat Terminal Housing And Auxiliary Heater Heating Element
GWWM80-10038Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Additional installation is in reverse order of removal.

scientia non olet · About LEMON Manuals